About Mechcore ElectroTech Solutions
Industrial Electronics
Repaired Faster
With Real Diagnostics
We repair industrial electronics at component level for heavy equipment, forklifts, generators, PLCs, automation systems, and field machines across the UAE.
Fault report before work starts
Component level PCB repair
On site support available
Our story
We did not start in a lab. We started on the ground.
Mechcore ElectroTech Solutions was built by engineers who worked directly with heavy machinery, diesel generators, forklifts and industrial control systems in the field.
The same problem appeared again and again. Electronic boards failed, OEM replacements were expensive, lead times were long and most workshops only swapped parts instead of finding the real fault.
Mechcore was built to be the alternative. Component level repair, root cause analysis, honest fault reports and a turnaround that respects your downtime.
2005
Founded from hands on experience with heavy equipment, forklifts and generators.
Then
Built a reputation across UAE industries for going deeper than basic replacement work.
Now
Nine sectors, fifty plus OEM brands and workshop plus on site service across the UAE.
What we do
Seven services. One technical standard.
If it has a circuit board and controls something important, we repair it at component level with a clear fault report before work begins.
Industrial Electronic Repair
PCB and component level repair for industrial control boards, power supplies and electronic modules.
Learn moreHeavy Equipment Diagnostics
ECU, CAN bus and full network diagnostics for excavators, cranes, drilling rigs and heavy plant.
Learn moreForklift Electronics
Traction controllers, BMS, charger boards and display electronics across major forklift brands.
Learn morePLC and Industrial Automation
CPU modules, I/O cards, servo drives, HMI panels and VFD repair across major automation brands.
Learn moreGenerator Electronics
AVR, AMF panels, control modules and engine governor electronics for major generator brands.
Learn moreOn Site Technical Support
Portable diagnostics across the UAE for machines that cannot easily come to the workshop.
Learn moreTesting and Calibration
Sensor calibration, load cell verification, preventive diagnostics and electronic component testing.
Learn moreTechnical depth
What chip level repair actually means
Most repair shops replace the whole board. We find the failed component and repair the actual fault so you pay for what is broken, not what is easiest to swap.
PCB and Board Level Repair
SMD repair, through hole soldering, burned track repair, component identification and conformal coating restoration.
CAN Bus and Network Diagnostics
Network scans, node mapping, J1939 fault isolation and signal testing across CAN, Profibus, Modbus and CANOPEN.
Drive and Inverter Repair
IGBT, MOSFET and gate driver testing across VFDs, servo drives, spindle drives and UPS inverter electronics.
ECU and Controller Diagnostics
Live data monitoring, actuator testing and hardware level fault analysis beyond simple code clearing.
Obsolete and Legacy Equipment
Discontinued boards, out of production controllers and OEM unsupported hardware with global component sourcing.
Written Fault Report Always
Every job includes what failed, why it failed, what we will do and the exact cost before repair begins.
Brands we work on
All major industrial electronics brands covered
Industries served
Nine sectors. One technical standard.
We expanded into new sectors because the problem was the same everywhere. Electronics failed and nobody went deep enough to repair them properly.
Heavy Machinery and Equipment
Excavators, cranes, crushing plants, drilling rigs, PLCs, drives, CAN bus and hydraulic control electronics.
Explore sector MHEMaterial Handling Equipment
Forklifts, conveyors, AS/RS systems, controllers, BMS, charger electronics and drive systems.
Explore sector AGVAgriculture Equipment
Tractors, harvesters, sprayers, ECU, ISOBUS, GPS guidance and precision farming electronics.
Explore sector CONConstruction Equipment
Tower cranes, batching plants, MEWPs, generators, control electronics, safety electronics and drive systems.
Explore sector IMFIndustrial Manufacturing
CNC machines, production lines, robots, packaging systems, PLCs, servo drives, HMI and safety systems.
Explore sector PENPower and Energy
Generators, UPS systems, solar inverters, protection relays and complete power electronics diagnostics.
Explore sector MPEMarine and Port Equipment
Vessel electronics, port cranes, winches, navigation electronics, engine control and cargo handling systems.
Explore sector OGEOil and Gas Equipment
Wellhead controllers, SCADA, flow computers, fire and gas systems with documentation focused repair.
Explore sector FMHFacility Management and HVAC
BMS controllers, VFDs, chiller electronics, AHU boards and building automation control repair.
Explore sectorWhy Mechcore
The difference between a repair and a replacement
We are not the workshop that swaps boards and hopes for the best. We diagnose, document and repair the real fault.
Component Level Repair
We identify the exact failed component and replace what is actually faulty. This can reduce cost and prevent the same failure from returning.
Root Cause First
A fault code tells you what happened. Root cause analysis tells you why it happened. We document both clearly.
OEM Independent
We work across major equipment brands without manufacturer lock in, which helps mixed fleets and older machines.
Legacy Equipment Expertise
Discontinued or hard to find boards are not an exception for us. Obsolete component sourcing is part of the work.
Written Report Every Job
Before work begins, you receive what failed, why it failed, what we will do and what it costs.
Field Callout Available
When the machine cannot come to us, our engineers can attend site with portable diagnostic equipment across the UAE.
How we work
The principles behind every repair
Every job follows the same rule: diagnose first, document clearly, repair precisely and communicate honestly.
We issue a fault report before work starts. If repair is not viable, we tell you clearly.
We replace only what is faulty, not what is convenient.
Every repair comes with written documentation, including fault found, components replaced and test results.
We understand downtime has a real cost, so timelines and communication stay clear.
The goal is not just to fix it and send it back. The goal is to understand why it failed, document that and return something that will not fail the same way again.
Mechcore ElectroTech Solutions founding principleClient feedback
What our clients say
Real repair stories from clients who needed fast diagnostics, clear reporting and reliable industrial electronics support.
Our excavator ECU had a fault that two other workshops could not solve. Mechcore diagnosed it quickly, repaired the board and saved us weeks of OEM wait time.
We manage a warehouse with multiple forklifts. Mechcore handles our controller and charger repairs faster than dealer replacement routes.
Generator AVR failed at our facility. Mechcore attended, diagnosed the issue and got us back on generator power the same day.
Ready to work together?
Your equipment is down.
Let’s find out why.
Submit your fault details and our team will assess it, diagnose it honestly and give you a clear repair path with a written report before any work begins.